2.jpg 2
2.jpg 2

ThruScan® s6 Walk Through Metal Detector

Technical Features:                                                                

   Package Dimensions (W x L x H):

Ambient Temperature: -20°C to +70°C

Box 1: 81 x 235 x 21 cm (65 kg)

Operating voltage:70 VAC – 270VAC / 50Hz – 60Hz

Box 2: 25 х 80 х 27 cm (12 kg)

Power: 10W Stand By- 20W (Alarm)

Net Weight: 60 Kg

Net Passage: 740x680x2000 mm

External: 850x680x2200 mm

Gross Weight: 77 Kg


Walk Through Metal DetectorElektral A.S.

Product Description

Conforms with European Norms NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2008 QMS In conformity to CE , Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment) Electromagnetic Field-EMC conforms to International Health and Safety Norms Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Gives Alarm to all threat objects detected in different Alarm Zones. Detects all threat objects even those hidden with camouflage, concealed and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm. ThruScan/s6 Multi-Zone – 6 Matrix Detection Zones (Up/Middle/Down and Left/Right) 10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 standard pre-set international security program Auto Calibration (Automatically calibrates itself to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By No Interference between Zones and No False Alarms Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top Can detect when tested both individually and in combination. Green/Red traffic control LEDs allow to enter 30 Persons / Min. Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4×20 Characters LCD Screen Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation. Five Digit Incoming Counter (Visible/Invisible) Alarm Counter (Five Digit) IR Pass Sensor On / Off selection Four-digit changeable digital Pin Code Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment) Reloading the factory default settings by one-touch button Easy programming and monitoring with wide LCD display 4 Menu Languages, Standard menu in English, German, Spanish and Turkish OPTIONAL -Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains No seasonal adjustment requirement thanks to its Digital Electronic System (DSP) Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design IP 20 (Optional IP 65) Protection Level (EN 60529) Manufactured for 7/24 Continuous Operation 74 cm Net Passage Width and 200 cm Net Passage Height Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objectsgaruntee en Audio-Visual alarms are noticeable at a range of 2 meters Micro-Processor Settings do not change when there is an electricity cut-off Strong plastic footers for sturdy placement and durable use.

Additional Information

მეტალოდეტექტორის ტიპი

არკა მეტალოდეტექტორი

Reviews

There are no reviews yet.

Be the first to review “ThruScan® s6 Walk Through Metal Detector”